Zurück
Preisvergleich – in Kürze
Wir verbinden uns gerade mit Partner-Shops, um dir hier den besten Preis aus mehreren Händlern zu zeigen. Diese Funktion wird bald freigeschaltet.
Katalog-Minifiguren (1)
Gypsy Moth / Navigator...
Teile-Übersicht (48)
| Teilenr.↕ | Bezeichnung↕ | Farbe↕ | Menge↕ | |
|---|---|---|---|---|
|
2420 | Plate 2 x 2 Corner | Blue | 2× |
|
2458 | Brick Special 1 x 2 with Pin | Blue | 1× |
|
2555 | Tile Special 1 x 1 with Clip and Straight Tips | Black | 5× |
|
2569 | Antenna 8H Whip | Trans-Neon Green | 4× |
|
2569 | Antenna 8H Whip | Black | 1× |
|
2607 | Magnet Holder 2 x 3 | Dark Gray | 1× |
|
30014 | Arm Holder Brick 1 x 2 with 2 Horizontal Fingers | Dark Gray | 2× |
|
30035 | Equipment Space Scanner | Black | 2× |
|
30208 | Dome Hemisphere 4 x 4 Multifaceted | Trans-Neon Green | 2× |
|
30209 | Plate Special 1 x 2 with 4 x 4 disk at 90 degrees | Dark Gray | 2× |
|
3021 | Plate 2 x 3 | Black | 1× |
|
30211 | Support Leg Small [Insectoids] | Dark Gray | 4× |
|
30213 | Rock 2 x 2 Crystal 3 Point | Trans-Neon Green | 1× |
|
3022 | Plate 2 x 2 | Blue | 2× |
|
3023 | Plate 1 x 2 | Black | 1× |
|
3023 | Plate 1 x 2 | Blue | 1× |
|
3023 | Plate 1 x 2 | Dark Gray | 1× |
|
30230pr0001 | Wing Insectoid Large with Arm Hinge and Circuitry Print Left (Print on Top, Tip on Left, Logo at Back Edge) | Trans-Dark Blue | 1× |
|
30230pr0002 | Wing Insectoid Large with Arm Hinge and Circuitry Print Right (Print on Top, Tip on Right, Logo at Back Edge) | Trans-Dark Blue | 1× |
|
3024 | Plate 1 x 1 | Blue | 1× |
|
3039 | Slope 45° 2 x 2 | Black | 2× |
|
3040b | Slope 45° 2 x 1 with Bottom Pin | Black | 2× |
|
3040bpr0012 | Slope 45° 2 x 1 with Bottom pin, with Black Crosshairs and Green Insectoid Print | Dark Gray | 2× |
|
3068bpr0353 | Tile 2 x 2 with Insectoid Logo in Triangle Print | Black | 1× |
|
3475b | Engine - Smooth, Small 1 x 2 Side Plate [With Axle Holders] | Black | 2× |
|
3623 | Plate 1 x 3 | Blue | 2× |
|
3665 | Slope Inverted 45° 2 x 1 | Blue | 2× |
|
3710 | Plate 1 x 4 | Blue | 6× |
|
3794a | Plate Special 1 x 2 with 1 Stud without Groove (Jumper) | Blue | 2× |
|
3795 | Plate 2 x 6 | Black | 1× |
|
3832 | Plate 2 x 10 | Black | 1× |
|
3937 | Hinge Brick 1 x 2 Base | Black | 2× |
|
3938 | Hinge Brick 1 x 2 Top Plate Thin | Blue | 2× |
|
4081b | Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring] | Blue | 2× |
|
412 | Arm Piece 90° Turn [2 / 3 Fingers] | Dark Gray | 2× |
|
4229 | Engine, Strakes, 2 x 2 Thin Top Plate | Black | 1× |
|
4286 | Slope 33° 3 x 1 | Blue | 4× |
|
4287a | Slope Inverted 34° 3 x 1 without Internal Stopper | Black | 4× |
|
4589 | Cone 1 x 1 [No Top Groove] | Trans-Neon Green | 4× |
|
4595 | Brick Special 1 x 2 x 2/3 with Studs on Sides | Black | 1× |
|
4740 | Dish 2 x 2 Inverted [Radar] | Trans-Neon Green | 3× |
|
4746 | Tail 4 x 2 x 2, Rocket | Black | 1× |
|
4859 | Wedge Plate 3 x 4 without Stud Notches | Blue | 1× |
|
71603 | Light and Sound Unit, Insectoid Tail 4 x 20 x 3 | Dark Gray | 1× |
|
73092 | Magnet Cylindrical | Black | 1× |
|
73590c02a | Flexible Hose 8.5L with Tabbed Ends (Ends same color as Tube) | Black | 2× |
|
stickerupn0038 | Sticker Sheet for Sets 2964-1, 2965-1, 5316-1, 6817-1, 6837-1, 6903-1, 6905-1, 6907-1, 6909-1, 6919-1, 6969-1, 6977-1 | [No Color/Any Color] | 1× |
|
|
upn0176 | Play Gear, Mask, Hard Plastic, Insectoids | Black | 1× |
Hinweis: Die Herstellerdaten wurden nach bestem Wissen und Gewissen aus öffentlich zugänglichen Quellen zusammengetragen – ohne Gewähr für Richtigkeit, Vollständigkeit und Aktualität. Offizielle Anfragen bei den Herstellern sind gestellt bzw. in Arbeit.