- Hersteller: LEGO
- Set-Nr.: 31089
- Thema: Creator
- Unterthema: Creator 3-in-1
- Erscheinungsjahr: 2019
- Altersempfehlung: 7+
- Teile: 221
- Abmessungen: L 6,1 × B 26,2 × H 19,1 cm
- Gewicht: 380 g
- Verpackung: Box
- UVP: 19,99 €
- Anleitungen: Bauanleitung 1 Bauanleitung 2 Bauanleitung 3
Fahre als Erster über die Ziellinie – mit dem LEGO® Creator 3-in-1-Set „Rennwagen“ (31089). Dieses Spielzeug-Auto basiert auf einem echten Motorsportfahrzeug und ist mit einer aerodynamischen Karosserie mit großen Lufteinlässen ausgestattet. Zudem überzeugt es mit einer knalligen Farbgebung in Orange, Weiß und Dunkelblau. Weitere Ausstattungsmerkmale sind eine abgerundete, getönte Windschutzscheibe, getönte Frontscheinwerfer, ein sichtbarer Heckmotor, ein großer Heckspoiler und griffige Reifen. Öffne das Dach, um in das Cockpit einzusteigen oder sieh dir die reibungsarme Kreuzachsenkonstruktion an. Die LEGO Creator 3-in-1-Sets bieten dir drei verschiedene Bau- und Spielerlebnisse. Baue den Rennwagen oder für noch mehr actionreiche Rennabenteuer einen offenen klassischen Rennwagen oder ein Speedboot.
Dieses LEGO® Creator 3-in-1-Set bietet 3 verschiedene Baumöglichkeiten: Nachdem du den Rennwagen gebaut hast, kannst du ihn in einen offenen klassischen Rennwagen oder ein leistungsstarkes LEGO Speedboot umbauen, um hinter dem Steuer noch mehr rasante Motorsportaction zu erleben.
Der Rennwagen verfügt über eine aerodynamische Karosserie mit großen Lufteinlässen, eine abgerundete, getönte Windschutzscheibe, ein zugängliches Cockpit, einen sichtbaren Heckmotor, einen großen Heckspoiler und griffige Reifen.
Sieh dir nur einmal die sportliche Farbgebung des Rennwagens in Orange, Weiß und Dunkelblau an.
Öffne das Dach, um in das Cockpit des Rennwagens zu gelangen.
Fahre bei Höchstgeschwindigkeit mit quietschenden Reifen durch die Kurven und entscheide das Rennen für dich!
Das Cockpit bietet Platz für eine Minifigur mit Helm (separat erhältlich).
Der Rennwagen ist 5 cm hoch, 16 cm lang und 7 cm breit.
Der klassische offene Rennwagen ist 4 cm hoch, 14 cm lang und 7 cm breit.
Das Speedboot ist 4 cm hoch, 14 cm lang und 7 cm breit.
Teile-Übersicht (90)
| Teilenr.↕ | Bezeichnung↕ | Farbe↕ | Menge↕ | |
|---|---|---|---|---|
|
11153 | Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | Orange | 4× |
|
11477 | Brick Curved 2 x 1 No Studs [1/2 Bow] | White | 8× |
|
15068 | Brick Curved 2 x 2 x 2/3 | Dark Blue | 1× |
|
15712 | Tile Special 1 x 1 with Clip with Rounded Edges | Black | 2× |
|
16091 | Steering Wheel Small, 2 x 2 [Reinforced] | Black | 1× |
|
18646 | Plate Round Half 3 x 6 with 1 x 2 Cutout | Orange | 1× |
|
18671 | Bracket 3 x 2 x 1 1/3 with Pin Bottom | Light Bluish Gray | 3× |
|
20482 | Tile Round 1 x 1 with Hollow Bar | Black | 2× |
|
23950 | Panel 1 x 3 x 1 | White | 2× |
|
2412b | Tile Special 1 x 2 Grille with Bottom Groove | Orange | 2× |
|
2420 | Plate 2 x 2 Corner | Dark Blue | 4× |
|
2420 | Plate 2 x 2 Corner | White | 4× |
|
2431 | Tile 1 x 4 with Groove | White | 2× |
|
2432 | Tile Special 1 x 2 with Handle | White | 1× |
|
2540 | Plate Special 1 x 2 Side Handle [Free Ends] | Black | 2× |
|
2654 | Plate Round 2 x 2 with Rounded Bottom [Boat Stud] | Black | 2× |
|
26601 | Wedge Plate 2 x 2 Cut Corner | Dark Blue | 4× |
|
28192 | Slope 45° 2 x 1 with 2/3 Inverted Cutout and no stud | Dark Blue | 2× |
|
29119 | Brick Wedged, Curved 2 x 1 with Stud Notch Right | White | 2× |
|
29120 | Brick Wedged, Curved 2 x 1 with Stud Notch Left | White | 2× |
|
3010 | Brick 1 x 4 | Dark Blue | 2× |
|
3010 | Brick 1 x 4 | White | 2× |
|
3020 | Plate 2 x 4 | Dark Bluish Gray | 2× |
|
3020 | Plate 2 x 4 | Orange | 1× |
|
3020 | Plate 2 x 4 | Dark Blue | 3× |
|
3021 | Plate 2 x 3 | Orange | 1× |
|
3021 | Plate 2 x 3 | Light Bluish Gray | 2× |
|
3022 | Plate 2 x 2 | Orange | 2× |
|
3023 | Plate 1 x 2 | Dark Blue | 2× |
|
3023 | Plate 1 x 2 | Orange | 6× |
|
3023 | Plate 1 x 2 | White | 4× |
|
3024 | Plate 1 x 1 | White | 4× |
|
3034 | Plate 2 x 8 | Black | 1× |
|
3068b | Tile 2 x 2 with Groove | Orange | 3× |
|
3069b | Tile 1 x 2 with Groove | Dark Blue | 3× |
|
3069b | Tile 1 x 2 with Groove | White | 4× |
|
3069b | Tile 1 x 2 with Groove | Orange | 2× |
|
3070b | Tile 1 x 1 with Groove | White | 2× |
|
32123b | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | Light Bluish Gray | 4× |
|
35299 | Windscreen 3 x 6 x 1 Curved with Rectangular Stud Holder in Bottom | Trans-Brown | 1× |
|
35480 | Plate Special 1 x 2 Rounded with 2 Open Studs | Black | 1× |
|
3623 | Plate 1 x 3 | White | 2× |
|
3623 | Plate 1 x 3 | Orange | 2× |
|
3623 | Plate 1 x 3 | Dark Blue | 4× |
|
3666 | Plate 1 x 6 | Black | 5× |
|
3703 | Technic Brick 1 x 16 [15 Pin Holes] | Black | 2× |
|
3710 | Plate 1 x 4 | White | 6× |
|
3795 | Plate 2 x 6 | Orange | 1× |
|
3795 | Plate 2 x 6 | White | 2× |
|
43722 | Wedge Plate 3 x 2 Right | Orange | 1× |
|
43723 | Wedge Plate 3 x 2 Left | Orange | 1× |
|
44676 | Flag 2 x 2 Trapezoid with Flat Area between Clips | Dark Blue | 2× |
|
4697b | Pneumatic T-Piece (T Bar) [New Style] | Light Bluish Gray | 1× |
|
48336 | Plate Special 1 x 2 [Side Handle Closed Ends] | White | 2× |
|
54200 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Trans-Red | 4× |
|
54200 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | Trans-Brown | 4× |
|
54200 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) | White | 6× |
|
55982 | Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes | Light Bluish Gray | 4× |
|
58090 | Tyre 30.4 x 14 VR Solid | Black | 4× |
|
60032 | Window 1 x 2 x 2 Plane, Hollow Studs, Single Hole Top and Bottom for Glass | Black | 2× |
|
60470b | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | Black | 1× |
|
60485 | Technic Axle 9 | Light Bluish Gray | 2× |
|
6091 | Brick Curved 1 x 2 x 1 1/3 with Curved Top | Light Bluish Gray | 4× |
|
61072 | Plate Special 1 x 4 with Angled Tubes | Flat Silver | 4× |
|
61409 | Slope 18° 2 x 1 x 2/3 with 4 Slots / Grate | Black | 2× |
|
6141 | Plate Round 1 x 1 with Solid Stud | Trans-Clear | 4× |
|
6231 | Panel 1 x 1 x 1 Corner | Black | 2× |
|
6231 | Panel 1 x 1 x 1 Corner | Dark Blue | 2× |
|
62361 | Wheel Arch, Mudguard, 1 1/2 x 6 x 1 [Arch Extended] | White | 4× |
|
6249 | Brick Special 2 x 4 with Pins | Dark Bluish Gray | 2× |
|
63864 | Tile 1 x 3 | Dark Blue | 2× |
|
6636 | Tile 1 x 6 with Groove | Orange | 2× |
|
85984 | Slope 30° 1 x 2 x 2/3 | White | 9× |
|
85984 | Slope 30° 1 x 2 x 2/3 | Orange | 1× |
|
92280 | Plate Special 1 x 2 [Top Clip] | Black | 2× |
|
93273 | Brick Curved 4 x 1 Double with No Studs | White | 3× |
|
93274 | Bracket 1 x 2 - 2 x 4 | White | 8× |
|
98281 | Brick Curved 6 x 4 x 2/3 Quad Curved with 2 x 2 Studs | White | 1× |
|
98834 | Spoiler 2 x 4 with Handle [Plain] | Dark Blue | 1× |
|
99206 | Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] | White | 5× |
|
99781 | Bracket 1 x 2 - 1 x 2 | Orange | 2× |
|
20482 | Tile Round 1 x 1 with Hollow Bar Ersatz | Black | 1× |
|
3024 | Plate 1 x 1 Ersatz | White | 1× |
|
3070b | Tile 1 x 1 with Groove Ersatz | White | 1× |
|
32123b | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced Ersatz | Light Bluish Gray | 1× |
|
4697b | Pneumatic T-Piece (T Bar) [New Style] Ersatz | Light Bluish Gray | 1× |
|
54200 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) Ersatz | White | 1× |
|
54200 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) Ersatz | Trans-Red | 1× |
|
54200 | Slope 30° 1 x 1 x 2/3 (Cheese Slope) Ersatz | Trans-Brown | 1× |
|
6141 | Plate Round 1 x 1 with Solid Stud Ersatz | Trans-Clear | 1× |
Hinweis: Die Herstellerdaten wurden nach bestem Wissen und Gewissen aus öffentlich zugänglichen Quellen zusammengetragen – ohne Gewähr für Richtigkeit, Vollständigkeit und Aktualität. Offizielle Anfragen bei den Herstellern sind gestellt bzw. in Arbeit.